News
Running safety and ride comfort
We were commissioned to carry out measurements on a new tram. The measurement campaign serves to test the fulfilment of the requirements for running…
Testing laboratory according to EN ISO/IEC 17025 - accreditation successfully completed
With the decision of the Federal Ministry of Labor and Economy of 2023-01-24 (GZ: 2022-0.909.583), the branch of Engenium GmbH located in Graz is…
Strength assessment for control arm bodies and ball joint pins
We were commissioned with the cyclic and static strength verification for specified loads in accordance with the FKM guideline for a link body and…
Strength assessment of a conical spring as an emergency spring
Engenium was commissioned to carry out a strength assessment for the metal components of a conical spring in accordance with the FKM guideline. This…
![[Translate to Englisch:]](/fileadmin/_processed_/3/d/csm_MRSPruefstand_d75eaebe5c.png "[Translate to Englisch:]")
Prototype development of a dynamic test bench for instrumented measuring wheelsets
We see applied research and development as an essential criterion for being competitive and prepared for future challenges. We are therefore all the…